An 868 mesh fence system with a distinctive appearance allows excellent vision making it suitable for many applications. 868 fence Panel, features twin, galvanized horizontal rods 8mm diameter positioned on either side of a 6mm diameter vertical. The panels are welded at the intersection points and offer superior resistance to impact damage or vandalism to the fence line. One edge of the panel is finished flush while the verticals project 30mm from the other edge to form a barbed top.

 

868 mesh fence has been designed for ease of installation and provides the contractor and user with a cost-effective solution for all boundary requirements. Typical applications include; Schools, Colleges and Universities. Many Local authorities specify 868 for use in Parks and around Public amenities.

 

 

Table-1: Specification of Double Wire Fence

Wire diameter	Mesh size	Panel size ( Hight × Width ) (mm)	Pile height (mm)	Pole type (mm)	Fittings
8/6/8 mm 6/5/6 mm 5/4/5 mm	200 × 50 mm	630 × 2500	1100	Rectangular type pole 60 × 60 × 2	Non-clip; rain cap
		830 × 2500	1300
		1030 × 2500	1500
		1230 × 2500	1700	Rectangular Type pole 80 × 80 × 2	Steel clips, plastic clip; rain cap
		1430 × 3000	1900
		1630 × 3000	2100
		1830 × 3000	2400
		2030 × 3000	2600
		2430 × 3000	2800
		2530 × 3000	3000
		2630 × 3000	3000

868 mesh fence combining a rigid re-enforced fixing and the tamper-resistant pin provides a secure fixing between the fence panel and the support post. The edge may be positioned at ground level when a flush top is required. Posts for 868 fence panels are positioned at 2.525m nominal centers and feature factory-fitted inserts. Panels are attached employing robust steel fixing brackets and M8 diameter tamper-proof bolts.

 

The range 868 mesh fence panels are available in three formats offering differing levels of protection for Boundary, Demarcation and Anti-Intruder functions. The latter systems have vertical or cranked extensions fixed to the posts to support three rows of barbed wire or barbed tape. Multi-Lift Panels offer an ideal system for use in areas such as ball-stop fencing, where increased height is necessary to contain the activity taking place. A cost-effective method is achieved by placing one panel above the other fixed to specially designed RHS posts.